Domatex containers are built in three separate stages.
-
The container floor is built as a sub-assembly. The floor is press-fitted to eliminate any gaps during welding. The floor is welded using high-strength deep-penetration welding rods. This procedure ensures the longevity of the container floor.
-
The container walls are constructed in a similar way by press-fitting the wall posts to the wall sheet. Typically, our walls are constructed using a 6x3.5x5/16 top angle. This innovative design by Domatex guarantees that if the wall is struck on the top angle, the wall will maintain it's structural integrity. In addition, the top angle is solid welded to the wall sheet at the rim. Also each post on the wall is continuously welded to the wall sheet. This method leaves no gaps for cracks to propogate along the post.
- The container door frame is constructed with 45 degree corners. This ensures that the door frame witll endure strenuous working conditions. This procedure prolongs the integrity of the door. The Domatex door is secured to the container with heavy duty hinges. The hinge itself is contructed with an inch and a half double extra heavy pipe utilizing a one inch solid bar as the pinion. The hinges secure to the container with a 4x1 solid flat bar.
|
